Izdelki za 24 v 20ah akumulator (50)

230/24V AC 500VA Steuertransformator Produktcode:SZG-23024500 Gewicht:7,290

The 12 Volt 1.7 kWh (133Ah) lithium battery is a powerful and compact battery ideal for a wide range of applications. From RV energy storage, auxiliary power and outboard trolling motors to industrial work platforms and other industrial equipment, it is ready to power all your needs

Automatic AC Voltage Stabilizer Maintenance-free Thyristor Technology 1kVA – 3.200kVA Power range Production at Single Phase, Two Phase, Three Phase Production at all industrial voltages Low Voltage Correction up to 60% High Voltage Correction up to 45% Response time: 20msec Correction Time: 100msec – 200msec 100% Unbalanced Voltage and Load Capacity Continuous protection against voltage fluctations Independent voltage management on each phase Efficiency >97% Standart Operator Panel with 4x20 LCD display Electronic Overload, Over Temperature Protection Low Voltage / High Voltage Protection Suitable design for industrial environment TS EN ISO 9001: 2015 Quality Certified Frequency:50 Hz. +/-%5 Correction Time:100msec - 200msec Efficiency:> 97% typical Operating Temperature:-10 °C ~ +40 °C Altitude Operating Height:1.500m

Automatic AC Voltage Stabilizer Maintenance-free Thyristor Technology 1kVA – 3.200kVA Power range Production at Single Phase, Two Phase, Three Phase Production at all industrial voltages Low Voltage Correction up to 60% High Voltage Correction up to 45% Response time: 20msec Correction Time: 100msec – 200msec 100% Unbalanced Voltage and Load Capacity Continuous protection against voltage fluctations Independent voltage management on each phase Efficiency >97% Standart Operator Panel with 4x20 LCD display Electronic Overload, Over Temperature Protection Low Voltage / High Voltage Protection Suitable design for industrial environment TS EN ISO 9001: 2015 Quality Certified Frequency:50 Hz. +/-%5 Correction Time:100msec - 200msec Efficiency:> 97% typical Operating Temperature:-10 °C ~ +40 °C Altitude Operating Height:1.500m

2x(0 – 30VDC / 0 – 5A)

230/230V AC 25VA Trenntransformator Produktcode:SZG-23023025 Gewicht:0,77

400/230V AC 50VA Trenntransformator Produktcode:SZG-40023050 Gewicht:1,376

TO.60DR Niederspannungs-Stromwandler

AC / DC 0 – 25V / 10A; 6V / 5A

The 48 Volt 3.4 kWh (66.5Ah) lithium battery is a powerful and compact battery ideal for a wide range of applications. From drive trains, auxiliary power to industrial work platforms and other industrial equipment, it is ready to power all your needs. Easy to connect and disconnect due to its flex connectors.

Le chargeur ZIVAN SG6 36V 45A CAN marque une révolution dans l'intégration d'une charge embarquée sur une plateforme de véhicule électrique. Le filtre PFC actif est parfaitement adapté aux applications du monde entier, acceptant une tension d'alimentation de 95 à 265 VAC. La configuration innovante de son dissipateur thermique, intégrée dans le robuste boîtier IP65 en aluminium moulé sous pression du chargeur, permet une flexibilité d'installation maximale et des conditions de travail extrêmes. Le SG6 utilise le microcontrôleur flash de dernière génération, qui est nécessaire pour gérer la multitude d’algorithmes de charge installés. L’interface CANBUS (2.0) permet l’intégration de l’unité dans l’architecture système du véhicule. L'abondante capacité de stockage permet d'économiser jusqu'à 1 000 cycles de charge, ce qui permet une analyse complète du comportement de la batterie et de son utilisation au cours de sa durée de vie. Référence:410-106 État:Neuf Alimentation:115VAC/230VAC - 50Hz/60Hz Rendement:> 85 % Température fonctionnement:de –20 à +50 °C Boitier:Metal base, capot PST auto-extinguible Dimensions:250 x 220 x 90mm Poids:5,0kg Indice protection:IP65

220v 1.5kw single phase input and 220v 3 phase output frequency converter/adjustable speed drive/frequency inverter/VFD 1.Output Power:1.5kw 2.Rated Frequency

Variateur 1 quadrant ALLTRAX AXE 2444 Tension 12V24V Courant max 400A Programmable par liaison RS232 Référence:210-2444 État:Neuf

LKP series is a standard level snap in type aluminum electrolyte capacitor that matches following SPEC. 1. LKP standard snap in type aluminum electrolytic capacitor can be used in switching power, frequency converter, air conditioning,for welder and PCB mounting etc. 2. Size can be customized according to your design. 3. The terminal type is varied from pins to soldering lug according to your design. 4. OEM/ODM is welcomed, can be customized according to your requirement. Liron is a professional capacitor manufacturer focusing on snap-in, screw terminal, radial type aluminum electrolytic capacitors and film capacitors. Liron owns world-class production equipments which can offer 120,000,000 pcs production output per month for its distinguished clients worldwide. Liron superior capacitor can match low ESR, long lifetime, low resistance, low leak current, High working voltage and more different requirements. Place of Origin:Guangdong, China (Mainland) Brand Name:Liron Model Number:LKP2G122MS070K Type:Snap in Aluminum Electrolytic Capacitor, snap in aluminum electrolyte capacitor Application:General Purpose Package Type:Carton Rated Voltage:400V Operating Temperature:-40~85℃ Product name:snap in type aluminum electrolyte capacitor Capacitance:1200μF Load life:2000 hours Size:35*70mm, or as customized ODM service；larger capacitance, bigger size, larger working voltage Rated voltage range:10V～250V | 315V～500V Capacitance tolerance:±20%（20℃，120Hz） Leakage current:1≤0.01CV（μA）or 1.5mA(Whichever is smaller){20℃，after 5 minutes} C=Nominal capacitance (μF) Standard:JIS C 5101-4 Operating Temperature range:-40℃～+85℃ | -25℃～+85℃

Product Features: • Primary 120VAC, 50/60 Hz., Secondary 120VAC. • Provides circuit isolation. • Toroidal transformer for high isolation, low noise, light weight, cool operation and low profile. • World wide applications, 50 or 60 Hz. operation, step down (120VAC to 120VAC). • Standard 3-wire, grounded plug (for use with adaptors for proper grounding). • Input (Primary) connected to a 5 foot long cord and standard North American plug (NEMA 5-15P). • Output (Secondary) connected to two standard - 3 wire grounded receptacles (NEMA 5-15R). • Features include ventilated black steel case, rocker lighted on-off switch and circuit breaker protected output. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Kondensatoren der E53- und E55-Reihen zeichnen sich durch einen besonders geringen Serienwiderstand und hohe Stoßstromfestigkeit aus. Durch die Nutzung einzigartiger Metallisierungsmuster, unsere SINECUT™ Schneidtechnologie und ausgeklügelte Wickelgeometrien eignen sie sich besonders zum Bedämpfen von GTO-Thyristoren und in Zwischenkreisen mit hohen Effektivströmen. Neben ihrem günstigen Verhältnis von Kapazität und Volumen zeichnen sich die E53-Kondensatoren durch sehr gute Selbstheilfähigkeit ohne Kapazitätsverluste aus. Ihre sehr niedrige Eigeninduktivität ermöglicht darüber hinaus auch den Einsatz in Hochstrom-Anwendungen im mittleren Frequenzbereich. Die Kondensatoren der E53-Produktfamilie sind in flammhemmenden Gehäusen (V0) untergebracht und mit Harz vergossen. Sowohl im Design als auch in der konservativen elektrischen Auslegung wurde großer Wert auf zuverlässiges Funktionieren auch unter schwierigen Umgebungsbedingungen gelegt.

In der Leistungselektronik im allgemeinen, speziell in niederinduktiven Zwischenkreisen höherer Spannungen sowie auch in Entladeschaltungen ist die Forderung nach niederinduktiven Kondensatoren mit Problemen verbunden: Traditionelle Hochspannungskondensatoren sind mit öl gefüllt, und die für die Luft- und Kriechstrecken großzügig auszulegenden Anschlussisolatoren wie auch der interne Sicherheitsmechanismus tragen wesentlich zur Eigeninduktivität des Kondensators bei. Basierend auf jahrzehntelanger eigener Erfahrung bei der Metallisierung von Kondensatorfolien hat ELECTRONICON unter Nutzung spezieller Metallisierungsarten eine Reihe von Hochspannungskondensatoren in selbstheilender Technologie geschaffen. Trotz der hohen Spannungsnennwerte wird die E51 Reihe in trockener Technologie und ohne aufwändige Anschlüsse gefertigt. Das Kondensatorelement im Inneren des Bechers aus selbstverlöschendem Kunststoff ist in PUR-Harz vergossen.

STATIC DIGITAL VOLTAGE REGULATION Effectual with extremely ultra fast speed of response – ensures hıghest performance for sensitive / mission critical loads and applications

The special kind of films and coating patterns used in our oil-filled E63-capacitors give them a high specific ratio of capacitance to volume and makes them extremely overvoltage proof. Very good self-healing characteristics and the integrated overpressure protection (" BAM ") ensure safe operation and controlled disconnection in the event of overload or failure at the end of operating life. Hence the E63s are interesting particularly for applications with high AC ripple currents, e.g. as smoothing or supporting capacitors in buffer storage circuits, in sensitive environment with high safety requirements. Note that the presence of an overpressure mechanism adds substantially to the self-inductance of the capacitor, and limits the surge current rating. If self-inductance and surge current are important issues, then our E50 or E53 ranges may be considered as a more adequate option.

The PK16™ capacitor can be universally used for the assembly of low inductance DC buffer circuits and DC filters; with its high energy density it can replace banks of series-connected electrolytic capacitors as well as large film capacitors in rectangular cases. The capacitance in a DC buffer circuit must be sufficiently sized to both handle and smoothen the occurring ripple currents. The traditional use of series-/parallel-connected electrolytic capacitors offered large capacitance at seemingly low cost, however the low cost per microfarad is countered by the very low current strengh, the high sensitivity to voltage and current surges, as well as a substantial risk of failures in the field, resulting in high maintenance cost. Our advanced know-how in special capacitor film coating and many years of practical experience in designing and manufacturing capacitors have allowed us to develop our PK16™ range with high capacitance density.